Fastuzm on Kar98K, Press the PCM and immediately a shot occurs. for convenience, I recommend putting «hold», instead of «press» the sight.If it is worth ,,press» and you are in the sight will remove the sight and then a shot will be fired. And after the shot, you will automatically enter back into the sight, you will need to press «PCM» to exit the sight.If it is worth,,holding»' all this will not happen and the macro will «fly». :). Use it, good luck!
Download the program (Download) and go to the macro editor
press the button «Open file»
and select the downloaded file
assign a macro to a key and run the program